Quick start guide for the Eyebot Jr.: 
Install the pic-axe basic programming editor [see www.rev-ed.co.uk]
(Password is 'picaxebegin') 
Run the programming editor 
Press VIEW->OPTIONS 
Select PICAXE-28, 28x, 256x gosub 
Write a program, or load an example 
Connect the serial cable from the computer to the Eyebot Jr 
Press the blue PLAY button to download the program to the eyebot 
Example Program:


main:
high portc 5
low portc 7
low portc 8
sound 5,(50,100)

This just selects the correct device as indicated in the table in the middle
of the spec sheet, (ie: selects the speaker) then makes a sound. Please review
the BASIC manual for relevant commands. (eg: PWM, In/Out & Servo commands)